Reckhorn BS-200i Bass Shaker

Reckhorn BS-200i Bass Shaker has a slightly larger magnet that produces a deeper vibration and is stronger compare to the previous model.

This improvement in performance is achieved with the use of high quality components and close tolerance manufacturing techniques. The 75mm voice coil has the highest possible heat resistance of 250°C and the aluminum housing cools the voice coil by heat dissipation and ventilation.

The moving magnet system mis securely guided with two  glass fibre reinforced dampers for stable control – even at high power. The resonant frequency is around 35Hz, which results in very controlled bass impulses with a softer suspension.

Variable low pass filter should be employ when using a standard power amplifier to prevent unwanted audio frequencies to the shaker.

Recommend low-pass filter setting should be around 50-80 Hz for movies and 100 – 150 Hz for gaming and simulation.

In order to vibrate correctly, the base of the Reckhorn BS-200i Bass Shaker must lie completely flat against the vibrating surface with no overhang. The most secure screw connection is made using particleboard screws with a toothed washer, but nuts and bolts can also be used where appropriate.

Package Contents

• 1 x BS-200i Bass Shaker
• 1 x Screw set
• 4 x G-44 Rubber Isolators

Technical information

• Power Handling (RMS): 100 Watts
• Impulse Power (2 seconds): 200 Watts
• Impedance: 4 Ohm

Compatibility

• Sim Lab Buttkicker Mounting plate Reckhorn BS200i

Dimensions & Weight

• Diameter: 158 mm
• Height: 45 mm
• Weight: 1.2 kg
• Mounting Hole Diameter (3): 5 mm

General information

• Manufactured by Reckhorn
• Made in Germany

Note

• Each BS-200i now includes 4 FREE G-44 rubber isolators
• Mounting Bracket – purchase separately